F 002 DG9 918 2017-10-16| Bosch Limited
4 | EPS 610 | Symbols useden
1. Symbols used
1.1 In the documentation
1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶ Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER
Immediate impend-
ing danger
Death or severe injury
WARNING
Possible impending
danger
Death or severe injury
CAUTION
Possible dangerous
situation
Minor injury
1.1.2 Symbols in this documentation
Symbol Designation Explanation
!
Attention Warns about possible property damage.
i
Information Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result There is a visible final result on com-
pletion of the instruction.
WARNING - Danger of hands getting trapped
between rotating parts
¶ Never hold your hand anywhere near the
flywheel when the EPS 610 is in opera-
tion!
¶ Cover rotating parts.
WARNING - Risk of burning!
The test oil might be hot and can cause
burning.
¶ Allow the test oil to cool before proceed-
ing with maintenance tasks.
¶ Wear safety gloves
WARNING!
The tommy bar used to rotate the flywheel
by hand must not be left inserted in the
locating holes of the flywheel!
¶ Always remove the tommy bar before
starting the EPS 610!
Symbol Description
Operate the machine only after connecting the
fuel injection pump.
Do not operate the machine without connecting
the fuel injection pump.
Ensure that the glass tubes do not hit the fix-
tures for the fuel injection pump while rotating
the swivel plate.
Wear safety goggles
Wear ear mufflers
1.2 On the product
! Observe all warning notices on products and ensure
they remain legible.