Bose FreeSpace IZA 190-HZ User Manual

Page 32 Installation and Operation English
Installation pro.Bose.com
3. Mount amplifier in a rack with four (4) rack screws and washers (not included).
Mounting two amplifiers
1. Remove rear rack ears from both amplifiers where they will meet in the middle. Then place the amplifiers upside-down
on a flat, level surface on a protective covering to avoid scratching the top of the chassis.
2. Attach a short rack ear to one side of each amplifier chassis with three (3) included screws.

Bose FreeSpace IZA 190-HZ Specifications

General

Amplifier class	D
RMS rated power	90 W
Channels quantity	1 channels
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	1 %
XLR in	Yes
Line inputs (RCA)	2
Line outputs (RCA)	1
Speakers connectivity type	RCA
Product color	Silver
Rack capacity	1U
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power protection features	Overheating, Short circuit
Power consumption (typical)	15 W
Package weight	4100 g

Weight and Dimensions

Depth	310 mm
Width	214 mm
Height	45 mm
Weight	3200 g