Bose L1 model 1S system User Manual

21
Venice_Care+Maint.fm 4/12
C
ARE AND MAINTENANCE
English Deutsch FrançaisDansk Español Italiano SvenskaNederlandsItaliano SvenskaDeutsch NederlandsFrançaisEspañol
Limited Warranty and Registration
Your product is covered by a limited warranty. Details of the warranty are provided with your
product. Register your products online at www.Bose.com/register or call (800) 905-1044.
Failure to do so will not affect your warranty rights.
Accessories
Visit www.Bose.com/livesound, or call (800) 905-0886 for accessory information.
Technical Information
Mechanical
Component Dimensions Weight
Power stand: 5''H x 10''W x 27''D 
(12.8 c
m x 26.2 cm x 69.2 cm)
23.7 lb 
(10.7 kg)
Top array: 43½''H x
3½''W x 4''D 
(111.0 cm
x 9.0 cm x 10.5 cm)
16.3 lb 
(7.4 kg)
Bottom extension: 39.63''H x
4.15''W x 4.13''D 
(100.
6 cm x 10.6 cm x 10.5 cm)
8.5 lb 
(3.8 kg)
B1 bass module: 15''H x
10¼''W x 17¾''
D 
(38.0 cm x 26.0 cm x 45.0 cm)
25.1 lb 
(11.4 kg)
B2 bass module: 23.4''H x
13.31''W x 18.9''D
(59.4
cm x 33.8 cm x 48 cm)
45 lb
(20.41 kg)
Electrical
•AC power rating: 
100-120V
50/60Hz 500W (USA/Canada); 220-240V 50/60Hz 500W (Europe)
• Peak inrush current: 
32A @ 120V
60Hz (USA/Canada); 61A @ 230V 50Hz (Europe)
Component Impedance
L1
®
model 1S loudspeaker: 
B1 bass module: 8
B2 bass module: 4
Audio Input/Output
• T1 ToneMatch
®
port: DC output/data input Ethercon/RJ45 connector for a 
T1 ToneMatch audio engine
• Analog Input: Line-level input channel for ¼" TRS phone plug
• Bass Module Out: Neutrik
®
NL4 output for one or two B1 bass modules
L1 and ToneMatch are registered trademarks of Bose Corporation in the U.S. and other countries.
All trademarks are the property of their respective owners.
VeniceOG.book Page 21 Monday, April 30, 2012 2:33 PM
8

Bose L1 model 1S system Specifications

General

Brand	Bose
Model	L1 model 1S system
Category	Amplifier
Language	English