English - 11
Setting up the System
Connecting the system to power
Before you set up the system on your network, connect the system to power.
1. Plug the power cord into the POWER connector on the system.
2. Plug the other end of the power cord into an AC (mains) power outlet.
Adding the system to your Wi-Fi
®
network
After you connect the system to power, you must download and install the
SoundTouch
™
app onto a smartphone or tablet that is connected to your network.
The app guides you through connecting the system to your network.
Note: If you do not have a smartphone or tablet, you can use a computer for
setup. See page 27.
Add the system to an existing SoundTouch™ account
If you have already set up SoundTouch
™
for another system, you do not need to
download the SoundTouch
™
app again.
1. On your smartphone or tablet, select the SoundTouch
™
icon to
launch the app.
2. Select EXPLORE > SETTINGS > Systems > ADD SYSTEM to add
another system.
The app guides you through setup.
To Next Page
Loading...
Need help?
General
