3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any
way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
WARNINGS/CAUTIONS:
This product contains magnetic material. Consult your physician on whether this might affect you
implantable medical device.
This product is not intended for installation or use in indoor water facility areas (including, without limitation,
indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture. Not
applicable for products rated IPX4-9.
Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted
candles, on or near the product.
Do NOT make unauthorized alterations to this product.
Do NOT use a power inverter with this product.
Do NOT use in vehicles or boats.
Use this product only with the power supply provided.
Do NOT place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat
registers or other apparatus (including amplifiers) that produce heat.
Do not use the ToneMatch® T4S/T8S mixer with a tripod/stand that is unstable. The mixer is only designed for
use on a 1/4″ screw (6,3 mm), and the tripod/stand must be capable of supporting a device with a minimum
weight of 1.9 kg (4.1 lbs) and an overall size of 214 x 311 x 83 mm (8.4 x 12.25 x 3.25 inches). Using a tripod/
stand that is not designed to support the size and mass of the T4S/T8S mixer may lead to an unstable and
hazardous condition that could result in injury.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
To Next Page
Loading...
Need help?
General
