Description
Vercise™ DBS Remote Control 4 Directions for Use
92378769-02 1 of 1157
Description
The Remote Control is a hand-held device that communicates with the Stimulator through a Bluetooth Low
Energy telemetry link. The Vercise Remote Control 4 is only compatible with Vercise Genus Stimulators
and the Vercise External Trial Stimulator 3 (ETS 3). The Remote Control functions include the following:
• Linking/De-Linking to a Stimulator
• Turning stimulation ON and OFF
• Increasing stimulation amplitude
• Changing and restoring Programs
• Accessing Clinician Menu Options
• Customizing Remote Control settings: language, volume, brightness
• Enabling/Disabling MRI Mode for MR conditional Stimulators
In addition to the functions listed above, the Remote Control is used to establish communication
between the Stimulator and Clinician Programmer (CP) for device programming. See the “Establishing
Communication Between Stimulator and Clinician Programmer” section of this manual for instructions.
Cautions
• Keep the Remote Control dry. It should not be exposed to moisture.
• Do not connect the Remote Control USB port to any other device except to the Remote Control
charger provided with it.
• Keep the Remote Control away from pets, pests, and children to avoid damage to the device.
To Next Page
Loading...
Need help?
General
