13 User Manual
No.
User Setting
Displayed
Default
Available
Description of
Setting Settings Available Settings
14 Temperature Hold Time
HOLD LONG
(HOLD Button)
[Only available if programming is enabled] Temperature Hold Time lets you select the time that your thermostat will
hold the temperature when the HOLD button has been pressed. When LONG is selected, the thermostat will hold your
temperature indefinitely. When 24HR is selected, the thermostat will hold your temperature for 24 hours and then return
to the current program temperature.
15 Temperature Override
ADJ LIMIT OFF
Adjustment Limit
‘ The Temporary Override Adjustment Limit will limit how much the temperature can be adjusted from the current
setpoint temperature. This setting will not allow the user to override the temperature past the selected limit amount
of 1, 2 or 3 degrees from the current setpoint.
16 Program Override
OVERRIDE 4 HR
Time Limit
[Only available if programming is enabled] The Program Override Time Limit allows you to set a maximum time limit
(in hours) that the thermostat will return to the program after a temporary temperature override has been made. You
may select 1, 2, 3 or 4 hours.
17 Thermostat Lock Code
SET LOCK 000
The Thermostat Lock Code sets a 3-digit code that you may use at any time to lock or unlock the thermostat keypad.
Setting the 3-digit code does not activate the lock feature. To lock or unlock the thermostat, see Locking/Unlocking
Thermostat, section 6. The lock code 000 cannot be used.
Temperature and Lock Code
LONG Select for long (permanent) HOLD mode
24HR
Select for 24 hour (temporary) HOLD mode
OFF Disables adjustment limit
1, 2, 3
Select adjustment limit of 1°, 2° or 3°
4 HR, 3 HR Select a program override time limit of
2 HR, 1 HR 1-4 hours
0-9
Select a 3-digit lock code of 0-9 for each digit
To Next Page
Loading...
Need help?
General
