User Manual 22
Temperature Adjustment
Temporary Adjustment (OVERRIDE) – Press or to adjust
the current set temperature. The set temperature will change
back to your programmed temperature a few hours later or
at the start of the next scheduled program event. OVERRIDE
will appear in the display during the entire override period.
Extended Adjustment (HOLD) – Press the HOLD button
to override all programming. You can continue to use
the or buttons to adjust the current set temperature.
Press HOLD again to resume the program schedule. You
can limit your hold time to 24-hours by adjusting User
Setting 14 in section 2.
NOTE: If your thermostat was configured to be
non-programmable, HOLD and OVERRIDE are
not available.
To Next Page
Loading...
Need help?
General
