KNOWINC
YOUR
SEWING MACHINE
USING YOUR SEWING MACHINE
AwARNINC
• Use only regular hou
se
hold electricity for
the
power source. Using other power sources may
result
in
fire, electric shock,
or
damage
to th
e machine.
• Make s
ur
e
that
the plu
gs
on the power cord
are
firmly inserted into the electrical outlet and
the power
supply jack on the machine. Otherwise, a fire
or
electric shock may result.
•
Do not insert the plug on the power cord into an electrical outlet that
is
in poor condition.
• Turn off the main power and remove the plug
in
the following circumstances:
• When you
are
away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly
due
to
a bad connection
or
a
di
sconnection
• During electrical storms
AcAur10N
• Use only the power cord included with this machine.
• Do not use extension cords
or
multi-plug adapters with many
other
appliances plugged
in
to
them.
Fir
e
or
electric shock may result.
• Do not touch the plug with wet hands. Electrk shock may result.
•
When
unplugging the machine, always turn off the main power first.
Alwa
ys
grasp the plug to
remove it
from
the outlet.
Pulling
on the cord may dama
ge
the
cord, or lead to fire or electric shock.
• Do not allow the power cord
to
be
cut, damaged, modified, forcefully bent, pulled, twisted,
or
bundled. Do not place heavy objects on the cord. Do not subject
th
e cord
to
heat.
Th
ese
thin
gs
may damage the cord and cause fire
or
electric shock. If the cord
or
plug is damaged,
take the machine
to
your authorized Brother Service Center for repairs before continuing use.
• Unplug the power cord
if
the machine is not
to
be
used for a long period of time. Otherwise
a fire may result.
Connecting plugs
~
Note
-----------
0
Connect the foot controller plug
to
the
machine.
•
If
a power outage occurs while
the
sewing
machine is being operated, turn off the main
power and
unplug
the
power supply cord.
When restarting
the
sew
ing machine, fo
ll
ow
the necessary procedure
to
cor
rectly
ope
rate
the machine.
A Connect the power supply plug
to
a wall
~outlet
.
7
To Next Page
Loading...
Need help?
General
