Chapter 2
18
Type and size of paper 2
The machine loads paper from the installed
standard paper tray or manual feed slot.
The name for the paper trays in the
printer driver in this Guide are as
follows:
2
Paper capacity of the paper trays 2
Recommended paper specifications 2
The following paper specifications are suitable for this machine.
Use paper made for plain paper copying.
Use paper that is 75 to 90 g/m
2
.
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Tray and optional unit Name
Standard paper tray Tray 1
Manual feed slot Manual
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, B5,
Executive, A5,
A5 (Long Edge), A6, B6
Plain paper, Thin paper
and Recycled paper
up to 250 [80 g/m
2
]
Manual feed slot
(Manual)
Width: 76.2 to 216 mm
Length: 116 to 406.4 mm
Plain paper, Thin paper,
Thick paper,
Bond paper,
Recycled paper,
Envelopes and Labels
Single sheet
[80 g/m
2
]
Basis weight
75-90 g/m
2
Thickness 80-110 μm
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%
To Next Page
Loading...
Need help?
General
Weight and Dimensions
