Brother HL-5240 User Manual

4. Control Panel
51
Control panel buttons
The control panel buttons have the following functions:
 Cancel printing
If you press Job Cancel while printing, the printer will immediately stop printing and will then eject the
paper.
 Wake-up
If the printer is in sleep mode, press Go or Job Cancel to wake the printer up and go to the Ready state.
 Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically
cleared, press Go to clear the error, and then continue to use the printer.
 Form feed
If the yellow Status LED is on for a long time, press Go. The printer will print any remaining data in the
printer memory.
 Reprint
To reprint the last document, press Go and hold it down for about 4 seconds until all the LEDs light up in
order (Toner, Drum, Paper, Status), and then release Go. Within 2 seconds press Go the number of
times you want to reprint. If you don’t press Go within 2 seconds, a single copy will be printed.

Brother HL-5240 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Internal memory	16 MB
Maximum internal memory	512 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	50 dB
Mac compatibility	Yes
Networking features	NC-2100p
Compatible operating systems	Windows 95 / 98 /Me & NT4.0 / 2000 / XP Mac OS Linux DOS
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	500 sheets
Media weight (tray 1)	60 - 105 g/m2
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	TCP/IP, ARP, RARP, BOOTP, DHCP, WINS/NetBIOS, LPR/LPD, Port9100, POP3/SMTP, SMBPrint, TELNET, SNMP, HTTP, TFTP
Display	-
Bundled software	- PCL Printer Driver & BR Script 3 (PPD file)~ Windows 95 / 98 / Me, & NT4.0 / 2000 / XP - Brother Laser Driver ~ Mac 9.1-9.2, Mac OS X 10.2.4 ~ - GDI Printer Driver - BR-Script 3 (PPD) - Interactive Help
Power consumption (standby)	80 W
Power consumption (printing)	610 W

Weight and Dimensions

Dimensions (WxDxH)	371 x 383 x 246 mm