EasyManuals Logo
Home>Brother>Printer>HL-5270DN

Brother HL-5270DN User Manual

Brother HL-5270DN
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
B. Appendix (For Europe and Other Countries)
135
IMPORTANT - For Your Safety
To ensure safe operation, the supplied three-pin plug must be inserted only into a standard three-pin power
outlet that is properly grounded through the standard electrical wiring.
Extension cords used with this printer must be three-pin plug type and correctly wired to provide proper
grounding. Incorrectly wired extension cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the
installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, call
a qualified electrician.
This product should be connected to an AC power source within the range indicated on the rating label. DO
NOT connect it to a DC power source. If you are not sure, contact a qualified electrician.
Disconnect device
You must install this printer near a power outlet that is easily accessible. In case of an emergency, you must
disconnect the power cord from the power outlet to shut off the power completely.
Caution for LAN connection
Connect this product to a LAN connection that is not subjected to overvoltages.
IT power system (For Norway only)
This product is also designed for an IT power system with phase-to-phase voltage 230V.
Wiring information (for UK)
Important
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as
the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.

Table of Contents

Other manuals for Brother HL-5270DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5270DN and is the answer not in the manual?

Brother HL-5270DN Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 9, 16, 25
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Maximum internal memory544 MB
Number of print cartridges1
Total input capacity250 sheets
Total output capacity100 sheets
Multi-Purpose tray input capacity50 sheets
Maximum print size210 x 297 mm
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)IPv4, IPv6
Networking featuresEthernet 10/100Base-TX
Power consumption (active)610 W
DisplayLCD
Sustainability certificatesENERGY STAR
Power consumption (standby)80 W
Power consumption (PowerSave)9 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)393 x 384 x 259 mm

Related product manuals