Setting Up the Machine
11
3 Load paper in the paper tray
1 Pull the paper tray completely out of the printer.
2 While pressing the blue paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
Note
Not applicable for European countries
For Legal size paper, press the lever (1) located at
the back of the tray and pull out the back of the
paper tray. Move the tray lock button (2) to the lock
position.
(Legal size paper is not available in some regions.)
3 Fan the stack of paper well to avoid paper jams
and misfeeds.
4 Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
5 Put the paper tray firmly back in the printer.
1
1
2
1
To Next Page
Loading...
Need help?
General