Brother HL-5280DW Quick Setup Guide

For Network Users
50
3 Web browser
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
The User Name is ‘admin’ and the default
password is ‘access’. You can use a web browser
to change this password.
See Chapter 2 of the Network User's Guide.
4 Network default settings
To restore all network settings of the internal print
server to default, follow the steps below.
1 Press the + or - button to choose NETWORK.
Press Set.
NETWORK
2 Press the + or - button to choose
FACTORY RESET.
Press Set.
FACTORY RESET
3 Press Set again.
OK?
5 Print the Printer Settings
Page
The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page:
1 Press the + button to choose INFORMATION.
Press Set.
INFORMATION
2 Press Set again.
PRINT SETTINGS
3 Press Set again to print the Printer Settings
Page.

Brother HL-5280DW Specifications

General

Brand	Brother
Model	HL-5280DW
Category	Printer
Language	English