Brother HL-5280DW User Manual

CHAPTER 10 CARBON COPY FUNCTION - 5
2.2. How to set each function
2.2.1. Setting on the control panel
(HL-6050/6050D/6050DN/5270DN/5280DW/5380DN)
PRINT
MENU
CARBON
MENU
CARBON COPY
=OFF/ON/AUTO
/ PARALLEL
Sets the carbon copy mode.
COPIES
=1 - 8 Sets the number of copies.
COPY 1 TRAY
=AUTO/REMAINING
MPTRAY
TRAY 1
TRAY 2
TRAY 3 *
Selects the paper tray.
COPY 1 MACRO
=OFF
(ID number)
Sets the additional macro.
(Note) When no macro is
set, 'NO MACRO
DATA' is indicated,
and the display
returned.
COPY 2 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 2 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 3 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 3 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 4 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 4 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 5 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 5 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 6 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 6 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 7 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 7 MACRO
(Same with COPY 1) (Same with COPY 1)
COPY 8 TRAY
(Same with COPY 1) (Same with COPY 1)
COPY 8 MACRO
(Same with COPY 1) (Same with COPY 1)
* (Only HL-5270DN/5280DW/5380DN Printer)
When CARBON COPY=OFF is set, other carbon menu is not indicated.
The setting indication of each copy is shown on the control panel for the number of copies which is
set in the CARBON COPIES menu to set the paper tray and macro.
The setting of each copy is saved even if it is not indicated.
When implementing FACTORY RESET, all settings are initialized.

Brother HL-5280DW Specifications

General

Brand	Brother
Model	HL-5280DW
Category	Printer
Language	English