Brother HL-5280DW User Manual

APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 5
3.1.4. PJL staple on/off
Format
@PJL SET/DEFAULT STAPLE=StapleName
Parameter
StapleName*
 UPPER LEFT: Select the upper left of the Finisher/Stapler unit
 UPPER RIGHT: Select the upper right of the Finisher/Stapler unit
 LOWER LEFT: Select the lower left of the Finisher/Stapler unit
 LOWER RIGHT: Select the lower right of the Finisher/Stapler unit
 OFF:
Default = UPPER LEFT
Explanation
 This command selects the staple.
 This command is ignored when the Finisher/Stapler unit is not available.
 The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.5. PS staple on/off
Command
<</BRStaple #>>setpagedevice
Parameter
#
 0:
Select off of the Finisher/Stapler unit.
 1:
Select the upper left of the Finisher/Stapler unit.
 2:
Select the upper right of the Finisher/Stapler unit.
 3:
Select the lower left of the Finisher/Stapler unit.
 4:
Select the upper right of the Finisher/Stapler unit.
Default = 0
Explanation
 This command selects the staple.
 This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<</BRStaple 0>>setpagedevice

Brother HL-5280DW Specifications

General

Brand	Brother
Model	HL-5280DW
Category	Printer
Language	English