Brother MFC-440CN User Manual

Troubleshooting and Routine Maintenance
137
Sending Faxes
Difficulty Suggestions
Cannot send a fax. Check all line cord connections.
Make sure that the Fax key is illuminated. (See Entering Fax mode on
page 34.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports on
page 88.)
Transmission Verification Report
says ‘Result:ERROR’.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get
‘Result:NG’ on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Advanced Fax Operation (see Turning off Advanced Fax
Operations on page 81), print fax messages in memory (see Printing a fax from
the memory on page 48) or cancel a Delayed Fax or Polling Job (see Cancelling
a fax in progress on page 35). If the problem continues, ask the telephone
company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to Basic. (See Compatibility on
page 147.)
Poor fax send quality. Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner on page 150.)
Vertical black lines when sending. If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 150.)
Handling Incoming Calls
Difficulty Suggestions
The machine ‘Hears’ a voice as a
CNG Tone.
If Fax Detect is set to on, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Fax Detect to off. (See Fax Detect
on page 46.)
Sending a fax call to the machine. If you answered on an external or extension phone, press your Fax Receive Code
(the factory setting is l 5 1 (l 9 1 for New Zealand)). When your machine
answers, hang up.
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, an alarm system EFTPOS,
PC/FAX modem or other custom feature on a single phone line with your machine,
it may create a problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM feature
should help overcome this problem. This condition is related to the telephone
system industry and is common to all devices that send and receive information
on a single, shared line with custom features. If avoiding a slight interruption is
crucial to your business, a separate phone line with no custom features is
recommended.

Brother MFC-440CN Specifications

General

Display	LCD
Built-in display	Yes
Display diagonal	2 \
Market positioning	Home & office
Print technology	Inkjet
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	25 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
Digital sender	No
Number of print cartridges	4
I/O ports	1x USB 1x RJ-45
Scan speed	6 sec/page
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	398 x 370 x 180 mm
Networking features	Ethernet 10/100Base-T
All-in-one functions	Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Windows 98SE/Me/2000/XP/Vista Mac OS X 10.2.4 + Linux
Scanner type	Flatbed scanner
Grayscale levels	256
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	18 cpm
Copy speed (color, normal quality, A4)	16 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	14.4 Kbit/s
Fax speed dialing (max numbers)	80
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Compatible memory cards	MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	MFL-Pro Suite ControlCentre3 ScanSoft Paperport SE ControlCentre2 NewSoft Presto! PageManager7 SYSTRAN WebTranslator 5.0
Package weight	10900 g