Brother MFC-440CN User Manual

Chapter 7
62
External and extension
phones 7
Connecting an external or
extension telephone 7
You can connect a separate telephone to
your machine as shown in the diagram below.
1 Extension telephone
2 External telephone
When you are using an external or extension
phone, the LCD shows Telephone
(MFC-440CN only) or Ext. Tel in Use
(MFC-665CW only).
Operation from extension
telephones 7
If you answer a fax call on an extension or an
external telephone plugged into the correct
socket on the machine, you can make your
machine take the call by using the Fax
Receive Code. When you press the Fax
Receive Code l 51 (l 91 for New
Zealand), the machine starts to receive the
fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code #51 (#91 for
New Zealand) to take the call at an extension
phone. (See F/T Ring Time (Fax/Tel mode
only) on page 45.)
If you answer a call and no one is on
the line: 7
You should assume that you're receiving a
manual fax.
Press l 51 (l 91 for New Zealand) and
wait for the chirp or until the LCD shows
Receiving, and then hang up.
Note
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 46)
Using remote codes 7
Fax receive code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the fax receive code
l 51 (l 91 for New Zealand). Wait for the
chirping sounds then replace the handset.
See Fax Detect on page 46. Your caller will
have to press Start to send the fax.
Telephone answer code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing #51
(#91 for New Zealand) (make sure you
press this between the rings).
(Example for Australia)
1
2

Brother MFC-440CN Specifications

General

Display	LCD
Built-in display	Yes
Display diagonal	2 \
Market positioning	Home & office
Print technology	Inkjet
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	25 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
Digital sender	No
Number of print cartridges	4
I/O ports	1x USB 1x RJ-45
Scan speed	6 sec/page
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	398 x 370 x 180 mm
Networking features	Ethernet 10/100Base-T
All-in-one functions	Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Windows 98SE/Me/2000/XP/Vista Mac OS X 10.2.4 + Linux
Scanner type	Flatbed scanner
Grayscale levels	256
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	18 cpm
Copy speed (color, normal quality, A4)	16 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	14.4 Kbit/s
Fax speed dialing (max numbers)	80
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Compatible memory cards	MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	MFL-Pro Suite ControlCentre3 ScanSoft Paperport SE ControlCentre2 NewSoft Presto! PageManager7 SYSTRAN WebTranslator 5.0
Package weight	10900 g