Brother MFC-8680DN User Manual

Control panel setup
104
6
Comm.Mode 6
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose WLAN.
Press OK.
d Press a or b to choose WLAN Status.
Press OK.
e Press a or b to choose Comm. Mode.
Press OK.
f The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
g Press Stop/Exit.
Set to Default (MFC-8890DW only) 6
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want
to reset both wired and wireless settings, see Restoring the network settings to factory default on page 123.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c (For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d Press a or b to choose Set to Default.
Press OK.
e Press 1 to choose Reset.
f Press Stop/Exit.

Brother MFC-8680DN Specifications

General

Brand	Brother
Model	MFC-8680DN
Category	All in One Printer
Language	English