Brother MFC-8680DN User Manual

68
5
5
Configuration in Infrastructure mode 5
Before configuring the wireless settings 5
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
• You can also setup your Brother machine using the machine’s control panel which we recommended. You
can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless
network (For MFC-8890DW) on page 21.
• You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your
wireless network environment. If you do not know them, contact your network administrator or the
manufacturer of your access point/router.
Check and record the current wireless network settings.
Wireless configuration for Macintosh
using the Brother installer application
(For MFC-8890DW)
5
Network name:(SSID, ESSID)
Communication Mode Authentication method Encryption mode
Network key
4
Infrastructure Open system
WEP
2
NONE —
Shared key
WEP
2
WPA/WPA2-PSK
1
AES
TKIP
3
LEAP CKIP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
AES
TKIP

Brother MFC-8680DN Specifications

General

Brand	Brother
Model	MFC-8680DN
Category	All in One Printer
Language	English