29
Arranging Embroidery Designs
Specifying the Design Page Size and Color
The color and size of the Design Page in addition to the color of the background can be changed. You can
select a Design Page size according to the size of hoop that you will be using with your embroidery machine.
1. Click Option, then Design Page Property.
→ The Design Page Property dialog box
appears.
2. Select the Design Page size.
To adjust the Design Page size according to
the hoop size, select the desired hoop size
from the Hoop Size selector.
3. From the Page selector, select the desired
color for the Design Page.
4. From the Background selector, select the
desired color for the background.
5. Click OK.
b Memo:
• The preview area shows the setting
changes that you make.
• When Hoop Size is selected, the
embroidery machine image shows the
orientation of the Design Page (hoop) in
relation to the machine.
a Note:
Do not select a hoop size larger than the
embroidery hoop that can be used with
your machine.
b Memo:
• To return to the default settings (100
×
100 mm (4"
×
4") of Hoop Size), click
Default.
• To close the dialog box without applying
the changes to the settings, click Cancel.
• The measurements for values displayed
in the application can be in either
millimeters or inches. For more details,
refer to “Changing the measurement
units” on page 55.
To Next Page
Loading...
Need help?
General