Bruker ultraflex Series User Manual

4 Cleaning the Source Bruker Daltonik GmbH
Figure 4-14 Brush the surface of the P2 plate without applying pressure
Figure 4-15 Brush between P2 plate and ground plate and behind the lens-plate; try to
push the brush completely through
Note Always soak cleaning materials in ethanol before starting cleaning. Do not
clean parts with dry tissues, swabs, or brushes.
After using the brush, all parts must be flushed with ethanol again.
Clean the brush with ethanol after use.
Page 36 of 44 ultraflex Series Cleaning Manual Revision 2

Bruker ultraflex Series Specifications

General

Brand	Bruker
Model	ultraflex Series
Category	Measuring Instruments
Language	English