2 VERTEX 70v User Manual
1
SAFETY
Warning Labels
Correct Usage
The spectrometer and its components should only be used according to the instructions
described in the manual or advised by a Bruker engineer. In case of accessories or
components made by other manufacturers and used in connection with the spectrome-
ter, Bruker does not assume any liability for safe operation and proper functioning.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WARNING LABELS
When operating the spectrometer you have to observe a number of safety instructions
which are highlighted by various warning labels. This section describes the warning
labels and explains their meaning. All warning labels on the spectrometer must always
be kept legible. Immediately replace a worn or damaged label.
The following warning labels indicate different dangerous situations which may be
caused by improper use of the spectrometer.
Caution - General Hazard
This warning symbol indicates general hazard. Observe the safety
instructions and follow the precautions described to avoid personal injury
and/or property damage.
Caution - Electrical Shock
This warning symbol indicates electrical hazard. The symbol is located near
live parts or on enclosures behind which are live parts that represent an
accidental contact hazard. Never touch these parts. Before removing the
corresponding compartment covers and beginning any maintenance or
repair work, first turn off the mains switch and unplug the main power cable.
Ensure that all live parts do not come into contact with a conductive sub-
stance or liquid. Non-observance of these safety instructions can cause
severe personal injury and/or property damage.
Caution - Hot Surface
This warning symbol indicates components and surfaces which can
become very hot during spectrometer operation. Do not touch these com-
ponents and surfaces. Risk of skin burn! Be careful when operating near
hot components and/or surfaces.
Caution - Laser Radiation
This warning symbol indicates the existence of laser radiation. Never look
directly into the laser beam or use any kind of optical instruments to do so.
Otherwise permanent eye damage can be the result.
To Next Page
Loading...
Need help?
General
