Bticino Sfera Keypad Module Installer Manual

22
4 Advanced configuration
4.1 Connection to the PC
To transfer the configuration performed using the TiSferaDesign software, or to update the
firmware, connect the Sfera Keypad Module to the PC using a USB-miniUSB cable.
mini USB - USB
BUS
When updating the software the device must be powered.
The Sfera Keypad Module connected using a USB cable is recognised by the PC as a virtual port (VIR-
TUAL COM).

Bticino Sfera Keypad Module Specifications

General

Brand	Bticino
Model	Sfera Keypad Module
Category	Control Unit
Language	English