Page
GENERAL 2
Identification 2
Operating Principles 2
1.0 INSTALLATION 2
1.1 Unpacking 2
1.2 Location 2
1.3 Power Requirements 2
1.4 Vacuum Connections and Drip Legs 3
1.5 Oil Filling 3
2.0 OPERATION 4
2.1 Start-up 4
2.2 Gas Ballast 4
2.3 Process Gas 5
2.4 Stopping Pump 5
2.5 Water-Cooled Pumps (optional) 5
2.6 Oxygen Service Pumps 5
3.0 ROUTINE MAINTENANCE 6
3.1 Pump Oil 6
3.1.1 Oil Filter 6
3.1.2 Oil Type and Quantity 6
3.1.3 Oil and Filter Change 6
3.1.4 Oil Flushing procedure 7
3.2 Automotive-Type Oil Filter 8
3.3 Exhaust Filter 8
3.4 Inlet Flange 9
3.5 Vacuum Inlet Filter (optional) 9
3.6 Routine Maintenance Schedule 9
3.7 Overhaul Kit/Filter 9
4.0 TROUBLESHOOTING 9
5.0 LIMITED STANDARD WARRANTY 14
Technical Data 14
Parts List 15
Illustration of R 5 0025-0040 16
Illustration of R 5 0063-0101 17
Illustration of R 5 0250 18
Busch Factory Service Centers 19
We reserve the right to change the product at any time without any form of notification. The information in this pub-
lication is accurate to the best of our ability at the time of printing. Busch, Inc. will not be responsible for errors
encountered when attempting to perform tasks outlined in this publication which is copyright protected.
TABLE OF CONTENTS
1
To Next Page
Loading...
Need help?
General
