Page 21 - Manual FA01693M4A - 06/2022
- © CAME S.p.A.. - Translation of the original instructions
The contents of this manual may change, at any time, and without notice.
Limits to use
Maximum number of devices that can be controlled
Type Quantity
RSLV001/RSLV001AC Modules 5 series
Operators 25 series
Installation
Place the device away from metal objects that can shield the
signal or devices that generate magnetic fields.
Interpose as few as possible walls between the device and the
router.
The device configuration is performed through WEB interface.
The device can be used without having to change the
default configuration. The settings described below are only
necessary if the network settings have to be changed.
Access to configuration pages through Ethernet
cable connection
Connect the device to your PC (router, switch) using the Ethernet
cable supplied.
Connect the power supply to the device and to the mains.
The device automatically takes the configuration from the network
to which it is connected (DHCP).
Access to configuration pages through Wi-Fi
connection
The device generates its own Wi-Fi network.
Connect the power supply to the device and to the mains.
Search on your PC (tablet, smartphone) the Wi-Fi network
generated by the device (SSID:QBE_0x0373xxxx).
Type the address of the device (192.168.9.1) in the address bar
of the browser (Chrome, Firefox, Safari).
To Next Page
Loading...
Need help?
General
