Page 30 - Manual FA01693M4A - 06/2022
- © CAME S.p.A.. - Translation of the original instructions
The contents of this manual may change, at any time, and without notice.
Modification of the characteristics of the Wi-Fi network
generated by the device
F If necessary, change the transmission frequency and power
G Assign a name (SSID) to the device.
H Configure the operation mode of the device.
ACCESS Point - The device generates its own Wi-Fi network
Client - The device connects to an existing Wi-Fi network
Status System Network General Options Exit
Wireless network: Master "QBE" (wlan0)
The Configuration section of the device manages the physical settings of the
wireless interface such as channel, transmission power, bandwidth. Network
settings such as encryption or mode of operation are grouped together in the
Interface Configuration section.
Operating frequency
Transmission power
Status
Mode
Mode
Channel Width
Configuring the device
General Settings
Interface configuration
General Settings Wireless Safety
Home Wi-Fi network
Client
FF
GG
HH
To Next Page
Loading...
Need help?
General
