Page 26 - Manual FA01693M4A - 06/2022
- © CAME S.p.A.. - Translation of the original instructions
The contents of this manual may change, at any time, and without notice.
[Restart]
C Press the button to restart the device.
[Network]
[Interfaces]
The screen is used to view the active network interfaces.
A Press the button to change the LAN (Ethernet) connection
configuration.
B Press the button to change the WWAN (Wi-Fi) connection
configuration.
C Indicate if the connection to the gateway takes place trough
Ethernet or Wi-Fi network.
4 Press the button to scan the available networks.
Do not select the Wi-Fi interface as the default gateway
without first having configured the Wi-Fi connection in slave
(Client) mode (please see the client configuration page) B.
Status System Network General Options Exit
Status System Network General Options Exit
Default Gateway
Network
Perform a restart operation
Edit
Edit
Save & apply
Reboot
Restart the operating system of your device
Interfaces
Network Status Actions
Scan
CC
AA
BB
44
CC
To Next Page
Loading...
Need help?
General
