Chapter 3
3-35
5) Remove the 2 screws [2], and close the extension
delivery kit.
F-3-155
6) Detach the extension delivery kit [1] from the host
machine.
F-3-156
3.4.3.5 Removing the Reversal
Sensor
0007-6220
1) Disconnect the connector [1], and detach the
reversal sensor [2].
F-3-157
3.4.4 Duplexing Inlet Sensor
3.4.4.1 Removing the Inside
Delivery Tray, Reversal
Guide, and Inside Upper
Cover
0007-6221
1) Remove the inside delivery tray [1].
2) Remove the reversing guide [2].
3) Remove the screw [3], and detach the inside upper
cover [4].
F-3-158
3.4.4.2 Removing the Right
Cover (rear)
0007-6223
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
F-3-159
[1]
[2]
[3]
[3]
[3]
[4]
To Next Page
Loading...
Need help?
General
