Canon DIM-462 User Manual

91
E
Playback
You can also choose to display the camcorder data (shutter speed and exposure settings) in the
data code.
Open the menu and select DISP.SET UP. Then select DATA CODE, set it to
DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu.
DATA CODE••• DATE/TIMEDISP.SET UP
( 20)
JAN. 1,2002
12:00:00 AM
12:00 AM
JAN. 1,2002
12dB
F11
1/250
12dB
F11
1/250
JAN. 1,2002
12dB
F11
1/250
12:00:00 AM
12dB
F11
1/250
12:00 AM
JAN. 1,2002
12dB
F11
1/250
12dB
F11
1/250
Date/Time Camera data
Date/Time &
Camera data
Time
Date & Time
Date
DATA CODE
D/TIME SEL.
(cassette
only)
Notes:
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder’s memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on the GL2 is played back on a different DV camcorder, the data code may
not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 150) has been set to OFF through
the menu.
Available data code combinations in TAPE PLAY (VCR) mode :
Only Date & Time display is available in CARD PLAY (VCR) mode.
+
PLAY
(VCR)
TAPE
Setting the Data Code

Canon DIM-462 Specifications

General

Brand	Canon
Model	DIM-462
Category	Camcorder
Language	English