Switching the Film Advance Mode
When , , , or Blinks
If the battery power drops in cold temperatures or the film advance
operation is slow, it means that the camera is trying to provide film
advance power rather than speed. This feature is called automatic film
advance transmission. If this is activated, one of the film advance icons
(, , , ) will blink on the LCD panel. This feature is canceled
when you press the < > button and < > button simultaneously or
when you replace the film or battery. If this feature is activated, check the
battery power (see page 22) and follow the respective countermeasures.
• If film advance or rewind stops midway, will blink on the LCD panel. When the battery is
replaced with a new one, film advance will resume. To resume film rewind, press the midroll
rewind button.
• In cold temperatures, warm the battery in your pocket, etc., to enable use.
Continuous Shooting Rates (approx. frames/sec.)
86
No viewfinder information is displayed during continuous shooting.
EOS 3
EOS 3 + BP-E1
EOS 3 + PB-E2
EOS-3 + Power
Drive Booster E1
2CR5 lithium battery
Size-AA alkaline batteries × 4
Nickel Hydride Pack NP-E2
Size-AA alkaline batteries × 8
Size-AA alkaline batteries × 8
4.3
7
3
6
3
6
3
3.3
7
3
5
3
5
3
Configuration Power Source
Film
Advance
Mode
One-Shot AF /
Manual Focus
AI Servo AF
06. C836-E (61~) 28-01-2003 11:49 Pagina 86
To Next Page
Loading...
Need help?
General
