37
Set the date and time as shown below.
1
Select [Date/Time].
¡ Select the [c] tab.
¡ Press the <V> key to select [Date/
Time], then press <0>.
s The date/time screen will appear.
2
Set the date and time.
¡ Press the <V> key to select the
digit, then press <0>.
¡ The selection will then shift to the
next item.
3
Set the date display format.
¡ Press the <V> key to set the date
format to [mm/dd/yy], [dd/mm/yy], or
[yy/mm/dd].
4
Press <0>.
s The date and time will be set and the
menu will reappear.
3 Setting the Date and Time
Each captured image is recorded together with the date and time it was
taken. If the date and time are not properly set, the wrong date/time will be
recorded with the images. Make sure you set the date and time correctly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
