57
With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
1
Photograph a white object.
¡ The plain, white object should fill the
viewfinder center.
¡ Set the lens focus mode switch to
<MF>, then focus manually. (p.76)
¡ Set any white balance setting (p.56).
¡ Shoot the white object so that a
standard exposure is obtained.
2
Select [Custom WB].
¡ Select the [m] tab.
¡ Press the <V> key to select
[Custom WB], then press <0>.
s The custom WB screen will appear.
3
Select the image.
¡ Press the <U> key to select the
image that was taken in step 1, then
press <0>.
s The image’s white balance data will
be imported and the menu will
reappear.
s The caution screen highlighted in
orange frame will appear.
4
Select [White balance].
¡ Select the [m] tab.
¡ Press the <V> key to select [White
balance], then press <0>.
s The white balance screen will appear.
3Custom White BalanceN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
