11
How to Turn ON the Main Power
This section explains how to turn ON the main power.
▀
Turning ON the Main Power
Make sure that the power plug is firmly inserted into the power outlet, and the breaker is turned ON.
1
Open the main power switch cover.
2
Press the main power switch to the "|" side.
•
The main power indicator on the control panel lights.
IMP
RTANT
If you want to turn ON the main power again, wait for at least 10 seconds after the main power and the main power
indicator are turned OFF. However, when [Quick Startup Settings for Main Power] is enabled, if you don’t wait more
than 20 seconds after the Main Power indicator is turned OFF, quick startup is not performed.
N
TE
The response of the keys and buttons may not be optimal immediately after turning ON the main power of the
machine.
▀
Shutting Down the Machine
Do not turn OFF the main power in the following situations
•
When using the I-Fax function
•
When the message <Backing up stored data from the Remote UI...> is displayed
•
When operating scan or print function
1
Open the main power switch cover.
2
Press the main power switch to the " " side.
•
The main power indicator on the control panel turns
OFF.
To Next Page
Loading...
Need help?
General