Canon IMAGERUNNER ADVANCE C5035 User Manual

xxiii
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a
month using the following procedure.
Make sure that the main power is turned OFF, before inspecting the breaker.
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
Checking the Breaker
1 Push the test button on the rear of the machine with the tip of a ball-point pen, or a similar
object.
Briefly push the test button.
The breaker is located on the rear of the machine.
For more information on the location of the breaker, see e-Manual > Before You Start Using This Machine.
2 Confirm that the breaker lever is switched to the OFF (" " side) position.
ON
( I side)
OFF
( side)
Do not use the test button to turn the power ON and OFF.
If the breaker lever does not switch to the OFF (" " side) position, repeat step 1.
If the breaker lever does not switch to the OFF (" " side) position, despite carrying out the above procedure two or three times,
contact your local authorized Canon dealer.
•
•
•
•
•
•
•

Canon IMAGERUNNER ADVANCE C5035 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	up to 100, 000 pages
Duplex Printing	Yes
First Print Out Time (Black)	5.4 seconds
First Print Out Time (Color)	8.1 seconds
Hard Disk Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm (black and color)
Copy Speed	35 cpm (black/color)
Paper Capacity	1, 200 sheets (standard)
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Memory	2 GB RAM
Functions	Print, Copy, Scan