1
Appendix
Specifications
1-14
Copy Card Reader-F1
Item Specifications
Available Cards Magnetic
Card Readout Method Magnetic readout
Magnetic Card Reading Direction Face up
Store/Replay Replay
Power Source From the main unit
Dimensions (H x W x D) 40 mm x 88 mm x 96 mm (Excluding the attachment kit and cable)
Weight Approximately 191 g (Including the attachment kit and cable)
Super G3 FAX Board
Specifications remain the same even when the Super G3 2nd Line FAX Board is installed.
Item Specifications
Telephone Line Used
*1
Public Switched Telephone Network
Scan line Density
(Scan, Transmission)
Normal:
Fine:
Super-Fine:
Ultra-Fine:
8 pels
*2
/mm x 3.85 line/mm
8 pels
*2
/mm x 7.7 line/mm
8 pels
*2
/mm x 15.4 line/mm
16 pels
*2
/mm x 15.4 line/mm
Transmission Speed Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method MH, MR, MMR, JBIG
Transmission Type Super G3, G3
Sending Original Sizes
A3, A4, A4R, A5*, A5R*
* Sent as A4
Receiving Paper Sizes A3, A4, A4R, A5, A5R
Transmission Times
ECM-MMR:
G3MR method:
G3MH method:
JBIG:
Approximately 3.2 seconds
Approximately 13 seconds
Approximately 13 seconds
Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations
(including destinations stored in one-touch buttons)
Image Memory Approximately 6,000 pages
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use facsimile communication via a general
telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
To Next Page
Loading...
Need help?
General
