86 Photos
Photos
Refer to this chapter for details on shooting photos – taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
1 Set the camera mode dial to or
.
2 Turn on the camcorder.
By default, photos are
recorded in the built-in memory. You
can set the memory card as the
recording media for photos ( 39).
3 Press halfway.
Once the focus is automatically
adjusted, will turn green and one
or more AF frames will appear.
4 Press fully.
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
( 30)
PHOTO
PHOTO
To Next Page
Loading...
Need help?
General