Canon LV-WX320 User Manual

49
ENGLISH
Controlling the projector remotely through a web browser
(e-Control™)
Once you have the correct IP address for the projector and the projector is on or in standby state, you can
use any computer that is on the same local area network to control the projector.
When using this function, Adobe Flash Player has to be installed in your computer. Please download
Adobe Flash Player from the website of Adobe Systems Incorporated.
1. Enter the IP address of the projector in the address bar of your browser and press enter. (for example,
http://192.168.0.146)
2. The remote network operation page is displayed. This page allows you to operate the projector as if
you were using the remote control or control panel on the projector.
i. These buttons function the same as the ones on the OSD menus or remote control. See "2.
PICTURE menu" on page 58 and "Remote control: LV-RC08" on page 16 for details.
ii. To switch input source, click on your desired source.
When you use the projector control panel or remote control to change the OSD menu settings, it
may take a while for the web browser to synchronize these changes with the projector.
3. The Tools page allows you to manage the projector, configure the LAN control settings and secure
access of remote network operation on this projector.
i. When using the Crestron Control System, please refer to the user manual of Crestron Control
system for setup information.
ii. You can name the projector, keep track of its location and the person in charge of it. This column
allows a maximum of 22 single-byte characters.
iii. You can adjust the LAN Settings.
i
ii
i
i
Press / to reveal
more buttons.
i
iv
iii
ii
v
vi

Canon LV-WX320 Specifications

General

Matrix type	DMD
Native aspect ratio	16:10
Projection distance	2 - 6.6 m
Projection technology	DLP
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projection distance (tele)	2.2 - 6.6 m
Projection distance (wide)	2 - 6 m
Projector native resolution	WXGA (1280x800)
Projector brightness (economic mode)	2550 ANSI lumens
Zoom capability	Yes
Noise level	38 dB
Noise level (economic mode)	31 dB
RMS rated power	10 W
Number of built-in speakers	1
Product type	Standard throw projector
Product color	White
Market positioning	Portable
Built-in display	-
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	3 W
Power consumption (typical)	350 W
Power consumption (economy mode)	240 W
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Weight	2500 g
Package depth	232 mm
Package width	282 mm
Package height	114.5 mm