Canon LV-WX320 User Manual

53
ENGLISH
• During standby
• During input source switching
• During command processing
• During AUTO PC execution
• Before the splash screen disappears after the power is turned on.
• Use 1 computer to control/monitor 1 projector.
• For how to control/monitor using PJLink™, see the operation manual of the PJLink™
application you use.
• When you monitor the projector's operating state using this function by issuing inquiry
commands successively, issue an inquiry command after receiving the response to the
previous inquiry command from the projector.
Using the Network Function when the projector is in standby mode
When the Standby LAN in the SYSTEM SETUP: Advanced > LAN Settings menu is activated, the
projector is able to provide the network function when it is in standby mode.
Glossary
For more detail of the glossary below, refer to the technical book that is commercially available.
Term Description
DHCP
Abbreviation for Dynamic Host Configuration Protocol. This protocol
automatically assigns IP Address to networked devices.
IP Address Numerical address to identify networked computers.
Subnet Mask
A numeric value to define the number of bits used for a network
address of a divided network (or subnet) in an IP Address.
Default Gateway
A server (or router) to communicate across networks (subnets) that are
divided by Subnet Mask.

Canon LV-WX320 Specifications

General

Matrix type	DMD
Native aspect ratio	16:10
Projection distance	2 - 6.6 m
Projection technology	DLP
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projection distance (tele)	2.2 - 6.6 m
Projection distance (wide)	2 - 6 m
Projector native resolution	WXGA (1280x800)
Projector brightness (economic mode)	2550 ANSI lumens
Zoom capability	Yes
Noise level	38 dB
Noise level (economic mode)	31 dB
RMS rated power	10 W
Number of built-in speakers	1
Product type	Standard throw projector
Product color	White
Market positioning	Portable
Built-in display	-
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	3 W
Power consumption (typical)	350 W
Power consumption (economy mode)	240 W
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Weight	2500 g
Package depth	232 mm
Package width	282 mm
Package height	114.5 mm