Canon MVX450 User Manual

14
Preparati on
Step 1: Preparing the Power Supply
The camcorder can be powered by a battery pack or be connected to a household power
source. Charge the battery pack before use.
Attaching the Battery Pack
1. Turn the switch to .
2. Open the LCD panel.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Slide in the connector end of the battery
in the direction of the arrow and press it
gently until it clicks.
To remove the battery pack:
1. Open the LCD panel.
2. Hold down the BATTERY
RELEASE button and pull out the
battery from the ridge on its
bottom part.
Charging the Battery Pack
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Open the front terminal cover and
connect the power adapter to the
camcorder’s DC IN terminal.
The CHARGE indicator starts flashing.
The indicator will stay on when the
charging is completed.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the
power outlet.
3. Disconnect the power cord from the adapter.
BATTERY RELEASE
button
CHARGE indicator
DC IN terminal
Downloaded From VideoCamera-Manual.com Manuals

Canon MVX450 Specifications

General

Filter size	27 mm
Digital zoom	800 x
Optical zoom	20 x
Focal length range	43.7 - 878 mm
Sensor type	CCD
Total megapixels	1.33 MP
Optical sensor size	1/5 \
Effective megapixels (movie)	750000 MP
Display diagonal	2.7 \
Display resolution	123000 pixels
I/O ports	AV
Resolution	640 x 480 pixels
Camera shutter speed	1/2000 ~ 1/6 s
Battery type	BP-208DG
Minimum illumination	2 lx
PictBridge	Yes
USB 2.0 ports quantity	1
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Viewfinder resolution	113000 pixels
Product color	Silver

Weight and Dimensions

Depth	109 mm
Width	57 mm
Height	77 mm
Weight	430 g