Name: Canon MVX450
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Editing

DV Dubbing

You can input video from other digital video devices via the DV terminal, and record the

input video on the tape in the camcorder. You can also record the input video as a movie

or still image on a memory card.

Connecting

Check the type and orientation of the DV terminal and make sure you connect the DV

cable properly. Refer also to the instruction manual of the connected device.

Dubbing

Available only in the mode.

1. Load a blank cassette in this camcorder.

If “AV DV” is displayed, change the setting ( 93).

2. Connected device: Load the recorded cassette or disc.

3. Open the FUNC. menu, select ( ) the record pause icon and

press ( ).

4. Select ( ) [EXECUTE] and press ( ) to start the search.

5. Connected Device: Play back the tape or disc.

In record pause mode and during recording, you can check the picture on the screen.

6. If the joystick guide does not appear on

screen, press ( ) to display it.

7. Push the joystick ( ) towards / when the

scene you wish to record appears.

• Recording starts.

• Push the joystick ( ) towards / again to pause/resume the recording.

8. Push the joystick ( ) towards to stop recording.

9. Connected Device: Stop playback.

Signal flow

Commercially available DV cable

Digital video device

(e.g. camcorder)

Output

Open the LCD panel

Downloaded From VideoCamera-Manual.com Manuals

Questions and Answers:

Need help?

Do you have a question about the Canon MVX450 and is the answer not in the manual?

Canon MVX450 Specifications

General