Name: Canon MVX450
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Audio Dubbing

You can add sound on a tape with the built-in or with an external microphone.

: You can also add sound from external audio devices.

This function is operated with the wireless controller.

Connecting an Audio Device

Refer also to the instruction manual of the connected device.

Dubbing

Available only in the mode.

1. Load a recorded cassette.

Use a tape recorded in SP, 12-bit mode with this camcorder.

: Continue directly to step 4.

: Select the audio source for the audio dubbing with the

following procedure.

2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select

( ) the [AUDIO DUB.] option and press ( ).

3. Set it to [AUDIO IN] or [MIC.IN] and press ( ) to save the changes,

then close the menu.

4. Locate the scene you wish to start audio dubbing.

5. Press the PAUSE button on the wireless controller.

6. Press the AUDIO DUB. button on the wireless controller.

“AUDIO DUB.” and “ ” appear.

7. Press the PAUSE button on the wireless controller to begin

dubbing.

• Microphone: Speak into the microphone.

• Audio device: Begin playback.

8. Press the STOP button on the wireless controller to stop dubbing.

Audio device: Stop playback.

( 63)

AUDIO SETUP AUDIO DUB.

AUDIO IN

AUDIO

Signal flow

STV-250N Stereo Video Cable

(supplied)

Audio device

(e.g. CD player)

OUTPUT

Open the terminal cover

Downloaded From VideoCamera-Manual.com Manuals

Questions and Answers:

Need help?

Do you have a question about the Canon MVX450 and is the answer not in the manual?

Canon MVX450 Specifications

General