137
Transferring Images
E
❍ You can press the SET dial in place of the button. With [ ALL
IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS], a confirmation
message appears. Turn the SET dial to select [OK] and press the SET dial.
❍ To cancel transfer, turn the SET dial to select [CANCEL] and press the SET dial,
or press the MENU button.
❍ Only still images in JPEG format and movies in Motion JPEG format can be
transferred.
❍ When transferring with the button, the camcorder retains the transfer
setting even if you turn it off or change the position of the TAPE/CARD switch.
When you have selected [ SELECT & TRANSFER] or [ WALLPAPER], the
screen to select a still image appears. Press the MENU button to display the
direct transfer menu.
❍ When the protect switch of the SD Memory Card is activated during image
transfer, the images will not be marked as “already transferred”, and will be
transferred again when you select [ NEW IMAGES] later.
To Next Page
Loading...
Need help?
General
