89
Editing
E
Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting
q Connecting an Audio Device
Refer also to the instruction manual of the connected device.
w Connecting a Microphone
See Recording with an External Microphone ( 63).
Dubbing
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it
to [AUDIO IN] or [MIC. IN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE a button on the wireless controller.
To Next Page
Loading...
Need help?
General
