130
You can automatically correct red eyes in images and save them as new
files.
Select [Red-Eye Correction].
● Press the n button, select the 1 tab
and [Red-Eye Correction], then press the
m button.
X The [Red-Eye Correction] screen will
appear.
Select an image.
● Press the qr buttons or turn the  dial
to select an image.
● You can zoom the image using the
procedures in “k Magnifying Images”
(p. 115).
Correct the image.
● Press the m button.
X Red-eye detected by the camera will be
corrected and a frame will appear around
the corrected portion.
● You can zoom the image using the
procedures in “k Magnifying Images”
(p. 115).
Save as a new image and display.
● Press the opqr buttons, or turn the Â
dial to select [New File], and press the m
button.
X The image will be saved as a new file.
● Perform Step 5 on p. 126.
] Correcting the Red-Eye Effect
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is selected, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
(EC260) CDI-E403_Guide_E.book Page 130 Thursday, December 18, 2008 2:02 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
