Canon PowerShot SX200 IS User Manual

151
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
• Confirm that the battery is properly inserted (p. 16).
• Confirm that the memory card/battery cover is securely closed (p. 16).
• If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
• Battery performance decreases at low temperatures. Warm the battery by such
methods as placing them in your pocket with the terminal cover on.
Lens will not retract.
• Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off (p. 17).
TV output
Image is distorted or not showing on TV (p. 116).
Shooting
Cannot shoot.
• Set the mode dial to the desired shooting mode (p. 42).
• When in playback mode (p. 27), press the shutter button halfway (p. 23).
Camera screen is black at start-up.
• Images that have been edited on a computer, have had their file name changed,
or that have been shot on another camera may not display properly if set as a
start-up screen.
Screen does not display properly in dark places (p. 46).
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
• When the camera is subjected to powerful light sources, the display may
darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear on
the screen.
• The h icon blinks when you try to shoot (p. 26).
h appears on the screen and the shot cannot be taken even
though the shutter button was pressed fully (p. 26).
Troubleshooting
(EC260) CDI-E403_Guide_E.book Page 151 Thursday, December 18, 2008 2:02 PM
COPY

Canon PowerShot SX200 IS Specifications

General

Megapixel	12.4 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.3 \
Maximum image resolution	4000 x 3000 pixels
Still image resolution(s)	640 x 480, 1600 x 1200, 2592 x 1944, 3264 x 2448, 4000 x 2248, 4000 x 3000
Digital zoom	4 x
Optical zoom	12 x
Combined zoom	48 x
Focal length range	5 - 60 mm
Interface	USB 2.0
Digital SLR	No
Power source	NB-5L 2
Aperture range (F-F)	3.4 - 5.3
Camera shutter speed	15 - 1/3200 s
Flash modes	auto, Flash off, manual, Red-eye reduction, Slow synchronization
Flash range (tele)	1 - 2 m
Flash range (wide)	0.5 - 3 m
Display diagonal	3 \
Display resolution (numeric)	230000 pixels
Product color	Blue
Scene modes	beach, Fireworks, Night landscape, Night portrait, party (indoor), Portrait, Sunset, Landscape (scenery)
Image editing	resizing, trimming
Photo effects	black&white, Neutral, Positive film, Sepia, Skin tones, Vivid
White balance	auto, Cloudy, custom modes, daylight, Fluorescent, manual, Tungsten
Camera playback	movie, single image, slide show
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Super Macro focusing range	0 - 0.02 m
Macro focusing range (wide)	0.02 - 0.5 m
Motion JPEG frame rate	30 fps
Video formats supported	MOV
Maximum video resolution	1280 x 720 pixels
Memory slots	-
Compatible memory cards	mmc, sd
USB version	2.0
Light metering	Centre-weighted, Spot
Light exposure modes	auto, manual

Weight and Dimensions

Depth	60.5 mm
Width	103 mm
Height	37.6 mm
Weight	220 g