Canon TR8600 Series User Manual

Poor Quality Fax Received
Check1
Check scan settings of sender's fax device.
Ask the sender to adjust the scan settings of the fax device.
Check2
Is ECM RX set to OFF?
Select ON for ECM RX in Adv. communication settings in Advanced FAX settings under FAX settings.
If ECM RX is enabled, the sender's fax device resends the fax after correcting errors automatically.
Fax settings
Check3
Is sender's original document or scanning area of sender's fax device dirty?
The image quality of the fax is mainly determined by the sender's fax device. Contact the sender and ask the
sender to check whether the scanning area of the fax device is dirty.
Check4
Is ECM transmission/reception enabled although the line/connection is poor, or
is the sender's fax device compatible with ECM?
•
Select ON for ECM RX in Adv. communication settings in Advanced FAX settings under FAX settings.
Fax settings
•
Contact the sender and ask the sender to check whether the fax device is set to enable ECM transmission.
If the sender's or recipient's fax device is not compatible with ECM, the fax will be sent/received without
automatic error correction.
•
Reduce the reception start speed on RX start speed in Adv. communication settings in Advanced FAX
settings under FAX settings.
Fax settings
Check5
Did you confirm paper and print quality settings?
Printout Results Are Unsatisfactory
523

Canon TR8600 Series Specifications

General

Brand	Canon
Model	TR8600 Series
Category	Printer
Language	English