3
69
English
68
English
EU – Declaration of Conformity
We, the manufacturer / importer
Canton Elektronik GmbH + Co. KG • Neugasse 21–23 • 61276 Weilrod • Germany
confirm and declare in sole responsibility that the product
Smart Amp 5.1
(Dolby Atmos® enabled Amplifier with several signal in- and outputs, RF Audio Transmitter,
WiFi and Ethernet connections, Bluetooth® wireless technology, internal switch mode power supply and infrared remote control)
is in accordance with the Directives of the European Parliament and of the Council
Directive 2014/53/EU (Radio Equipment)
Directive 2014/35/EU (Low Voltage Directive)
Directive 2011/65/EU (Restriction of the Use of Certain Hazardous Substances)
Directive 2012/19/EU (Waste of Electric and Electronic Equipment)
Directive 2009/125/EG (Ecodesign requirements for Energy-related Products)
Operation is permitted in all countries of the European Union�
A complete Declaration of Conformity can be found at: www.canton.de/en/doc
Legally binding signature:�����������������������������������������������������������������������
Date: June 1
st
, 2021 Name: Günther Seitz Function: Managing Director
marking
Further important information
Information on the “Intended Use”
The Smart Amp 5�1 is designed for indoor use and
must not be used outdoors or in a wet environment�
Do not make any conversions or modifications to the
device� Connect the Smart Amp 5�1 as described
in the instructions and observe the safety instructions�
Only operate the device with the mains voltage and
frequency specified on the rating plate�
Information about environmentally friendly operation
To reduce the power consumption, switch the Smart
Amp 5�1 to standby mode by pressing the “ON /
Standby” button when not in use� This “saves power”
and lowers your electricity bill�
Information about the firmware-versions
This manual is based on the following firmware-versions:
– WiFi [WIF]: P14807
– Google Cast [GC]: 1�44�219548
– STS Wireless [STS]: 1�20
– MCU Host [MCU]: 4�073 / 2�073
– DSP Audio [DSP]: 2�27
– OSD Fonts [OSD]: 1�20
Because of new firmware-versions, increased functionalities but also
differences in the display indications and/or in the controls may occur�
In case please visit our homepage for the latest manuel version�
Information about the CE marking
Electrical and electronic devices placed on the market within the Eu-
ropean Union must be given a CE mark to indicate that the equipment
complies with the applicable requirements (e�g�
electromagnetic compatibility or equipment safety)�
Disposal instructions
According to the EU Directive on Waste Electrical and Electronic
Equipment, devices marked with this symbol must not be disposed of
together with municipal waste (household waste)� Please inform your-
self, if necessary, contact your local disposal company or the municipal
/ city administration on disposal free of charge for you� It serves the
environmental and health protection as well as the saving of (rare) raw
materials by recycling�
Also Batteries must not be disposed of together with general household
waste� They must be collected separately and returned to a battery
collection point� Throw empty batteries into the collection container
free of charge, for example, those situated at the trade� Improperly
disposed of batteries can harm human and animal health and / or the
environment�
To Next Page
Loading...
Need help?
General
Weight and Dimensions
