Canton Smart Amp 5.1 Operating Instructions

3
17
English
16
English
LED indications
The LED indicates the following conditions:
• LED off (not illuminated) Amplifier disconnected from the mains
• LED shining red Amplifier in standby mode
• LED flashing green quickly Amplifier is booting
• LED shining green Amplifier is active (network connected)
-------------------------------------------------------------------------------------------------------------
• LED flashing green slowly Network disconnected
• LED flashing green Network setup mode
• LED flashing green/red Amplifier is executing a FW update
• LED flashing green two times Ethernet setup mode (LAN connected)
Display indications
On-Screen Display (OSD)
All settings and configurations of the Amp 5�1 can comfortably be done using the On-Screen display with your TV-Screen� To do so the Amp must be
connected with your TV using a HDMI
®
-cable� The menu is comprehensibly structured� Pressing the menu button (M) on the remote guides you to
the main menu�
Note: To change the language of the OSD (German or English), navigate to the main menu by pressing the menu button "M".
Select the menu Systemeinstellungen [SYS] by using the arrow buttons " " or " " and enter by pressing the "OK" button�
Use the arrow buttons " " or " " to select the menu item Sprache [LAN] in the submenu Display Setup [UI] and confirm by
pressing the "OK" button� Use the "+" or "-" button to select the desired language as German [DEU] or English [ENG] and
confirm your selection with the "OK" button�
Exit the menu by pressing and hold the menu button "M"�
LED Display
The Amp 5�1 has a multifunctional LED display build in the front of the Amp which will light up for 5 seconds when receiving a command� The most
important indications and their meanings are listed below:
Operation Display Meaning
Input TV HDMI
®
ARC input selected
Input BDP HDMI
®
HD1 input selected
Input SAT HDMI
®
HD2 input selected
Input PS HDMI
®
HD3 input selected
Input BT Bluetooth
®
input selected
Input NET Network input selected
Input AUX Analogue input selected
Input DVD First coax digital input selected
Input PAD Second coax digital input selected
Input CD Optical digital input selected
Sound Setting V35 Volume to 35 (of max� 70)
Sound Setting – – – Amp 5�1 is muted
Sound Setting BAS Bass tone control adjustment
Sound Setting MID Midrange tone control adjustment
Sound Setting TRE Treble tone control adjustment
Playmode STEREO Stereo mode selected
Playmode MOVIE Virtual surround sound for movie playback
Playmode MUSIC Virtual surround sound for music playback
Playmode NIGHT Virtual surround sound with reduced dynamic
Playmode PARTY Copy the audio signal from the front-speakers to the surround speakers
Playmode DISCRETE Surround sound for movie and music playback
Playmode PURE DIRECT Plays the input signal without using a virtualizer or upmixer
Bluetooth® BTP Pairing mode (Pairing)
Bluetooth® BT- / CON Connection established
Bluetooth® BT- / DIS Connection closed
Bluetooth® FAI Failure occurred during pairing process

Canton Smart Amp 5.1 Specifications

General

Video in	3x HDMI
Video out	1x HDMI
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
Product color	Black
Volume control	Touch
Cables included	AC
Treble adjustment	Yes
Connectivity technology	Wired & Wireless
Audio decoders	DTS-HD, Dolby Atmos
Audio output channels	- channels
Peak power per channel	600 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %

Weight and Dimensions

Depth	154 mm
Width	245 mm
Height	120 mm
Weight	5240 g