Canton Smart Connect 5.1 Short Manual

3
31
English
DISPLAY INDICATIONS
The Connect 5.1 has an On-screen display (menu visible in the TV), a LED status
indicator (green or red) and a LED display (in the front of the Connect 5.1).
On-Screen display
All settings and the configuration of the Connect 5.1 can be conveniently performed
via the on-screen display on your TV screen. To do this, Connect 5.1 must be connec-
ted to your TV via an HDMI cable. The menu is simple and structured and all changes
you make on Connect 5.1 are displayed on your TV. By pressing the menu button (M)
on the Smart-remote, you can access the main menu.
Practical tip:
• To change the default language of the on-screen display (German or English),
please go to the main menu by pressing the button „M“. Now select „System
Einstellungen“ and change the language under the menu item „Sprache“.
LED status indicator
When you switch on the Connect 5.1, the Status LED lights up green. In standby
mode, the Status LED lights up red.
LED display
The LED display is located in the front of the Connect 5.1 and lights up for five
seconds when a command is sent. The most important display indications and their
meanings are listed here:

Canton Smart Connect 5.1 Specifications

General

Control type	Touch
Product color	Black
Audio decoders	DTS, Dolby Digital
Built-in display	Yes
Bluetooth version	4.0
Display technology	LED
Cables included	AC
Power consumption (economy mode)	0.46 W
HDMI input ports quantity	3
HDMI output ports quantity	1

Weight and Dimensions

Depth	140 mm
Width	245 mm
Height	52 mm
Weight	1230 g